Kikusui TOS6200A, Руководство пользователя

Страница: 81 / 154

TOS6200A/6210 REMOTE and SIGNAL I/O 5-5
Table5-1 SIGNAL I/O Pin Configuration
No. Signal name I/O Description of signal
1 PM0 I LSB
LSD
2-digit BCD active-low input
Panel memory or program select signal input termi-
nal.
This select signal is latched at the rise of a strobe
signal to recall the panel memory or program.
2 PM1 I
3 PM2 I
4 PM3 I
5 PM4 I
MSD
6 PM5 I
7 PM6 I
8 PM7 I MSB
9 STB I Panel memory or program strobe signal input terminal.
10 N.C
11 N.C
12 N.C
13 COM Circuit common
14 TEST ON O ON during test.
15 TEST O ON during test (not including the period of a current/voltage rise.)
16 PASS O
ON for approximately 0.2s or more when a measured value is judged
PASS. It is continuously ON when PASS HOLD is set to ON.
17 UPPER FAIL O
Continuously ON if a measured value is the upper reference value or
greater and judged FAIL.
18 LOWER FAIL O
Continuously ON if a measured value is the lower reference value or less
and judged FAIL.
19 READY O ON while the tester is in ready status.
20 PROTECTION O ON if PROTECTION status arises.
21 START I Start signal input terminal.
22 STOP I Stop signal input terminal.
23 ENABLE I Start signal’s ENABLE signal input terminal.
24 +24 V O
+24V internal power output terminal. Maximum output current is 100
mA.
25 COM Circuit common