Kikusui TOS6200A, Руководство пользователя

Страница: 11 / 154

TOS6200A/6210 General 1-5
• Stores up to 100 types of test conditions
The tester allows you to store and name up to 100 test conditions involving param-
eters such as test current, determined resistance value, and test time. For example,
you can store test conditions for a specific safety standard under the name of the
standard, or store test conditions under the name of the destination of the DUT.
When test conditions need to be modified due to changes in the destination of the
product or revised safety standards, you can recall a set of test conditions simply
by entering a memory number, making necessary modifications to the pre-existing
standard.
Assigning specific names allows test conditions to called up by name. This func-
tion is available through both the front panel and the remote control.
• Programming of test conditions
A combination of stored test conditions allows automatic execution of tests con-
sisting of several programs of up to 100 steps each.
Although the total number of steps is limited to 500, 100 types of programs can be
stored and recalled from the front panel or the remote control.
• GPIB and RS-232C interfaces
The tester is provided with standard GPIB and RS-232C interfaces. It is therefore
not necessary to buy additional GPIB and RS-232C boards.
An interface cable and PC or sequencer allows remote control of test conditions
such as test current, determined resistance value, and testing time. Measured val-
ues and test results can also be read back.
• Supplied test leads
The tester comes with alligator clip test leads, letting you start testing immedi-
ately.
• Memo function
The tester has a memo function that can store up to 20 characters per line on 3
lines, which can be used to store serial numbers, calibration dates, and/or com-
ments.