Kikusui TOS6200A, Руководство пользователя

Страница: 113 / 154

TOS6200A/6210 GPIB and RS-232C 6-29
6.3.5 Memory-Related Messages
This subsection describes device messages associated with memory for test condi-
tions and their storage in memory.
On shipment from the factory, settings corresponding to various safety standards are
written to memory. For information on these settings, see Appendix A.3, “Initial
Settings of the Memory.”
MEMORY (MEM)
Sets memory contents according to resistance value-based judgment or inquires
about memory contents.
Messages
Command message:
MEM <memory no.>, “<memory name>,” <test
current value>, <upper reference value>, <lower refer-
ence value>, <test time>, <test frequency>, <lower
limit judgment>, <offset>, <timer>
Query message:
MEM? <memory no.>
• Program dataSets the memory contents in the following order.
• All parameters must be entered, even when the lower limit judgment is set to OFF.
Enter any value into the lower reference value field (the minimum value, for example).
Parameter
Set value
Resolu-
tion
Unit
TOS6200A TOS6210
Memory no. 0 to 99 1 <NR1>
Memory name
*1
20H to 7EH
ASCII code, maxi-
mum number of
characters: 12
Test current value 3.0 to 31.0 6.0 to 62.0 0.1 A <NR2>
Upper reference
value 0.001 to
1.200
0.001 to
0.600
0.001 OHM <NR2>
Lower reference
value 0.001 to
1.200
0.001 to
0.600
0.001 OHM <NR2>
Test time
0.3 to 99.9 0.1 s
<NR2>
100 to 999 1 s
Test frequency 50, 60 Hz
lower limit
judgment
0, OFF
OFF of lower limit
judgment
1, ON
ON of lower limit
judgment
Offset
0, OFF OFF of offset
1, ON ON of offset
Timer
0, OFF OFF of timer
1, ON ON of timer
*1: 22H """, 27H "'", 2CH ",", and 40H "@" may not be used.
NOTE