Kikusui TOS6200A, Руководство пользователя

Страница: 64 / 154

4-30 Basic Operation TOS6200A/6210
4.7.3 Running the Program
• Releasing the START switch when momentary is ON is equivalent to pressing the
STOP switch. If a step interval has been set to HOLD in programmed automatic
testing, the program cannot proceed to the next step.
Program execution is performed in the program screen (AUTO).
In the program screen, the cursor cannot be moved to any item other than the pro-
gram number.
1.
Press the AUTO key to display the program screen (AUTO).
2.
Specify the number of a program to recall (run) using the rotary knob.
In this case, the name of the selected program is displayed to the right of the
program number.
3.
Press the START switch to run the program.
During the test, the tester indicates "TEST" on the upper right corner of the LCD,
and the TEST LED indicator lights up. A running step will be displayed in reverse
video.
4.7.4 Suspending the Program
Press the STOP switch to halt testing during program execution.
Press the START switch again to run the program from the beginning.
4.7.5 PASS/FAIL Judgment During Program Execution
■
PASS judgment
PASS judgment is made with respect to the entire program only when the setting for
program repeat is END.
At the end of the programmed test, the tester returns a PASS judgment and reverts to
ready status.
■
FAIL judgment
If the tester returns a value FAIL judgment during program execution, it halts the
program. Check the step where the problem occurred and press the STOP switch.
Press the START switch to run the program again from the beginning.
NOTE
AUTO AUTO
TEST
PRG
05 : KIKUSUI
TOTAL:10
01 MEM00-9.9s
02 MEM00-9.9s
03 MEM00-9.9s
04 MEM00-9.9s
▼
NAME : --UNTITLED--
0.6
V
30.0
A
MAX
0.020
10.0
s