Kikusui TOS6200A, Руководство пользователя

Страница: 117 / 154

TOS6200A/6210 GPIB and RS-232C 6-33
• All parameters must be entered. Enter even values that do not need to be changed.
• You cannot skip numbers while setting step numbers. You must either overwrite a
currently set step with a new step or add it to the end of a list of steps.
• Sending a PRGEDIT (PED) command while the AUTO TEST screen is displayed
automatically brings up the AUTO EDIT screen.
• Up to 500 steps can be allotted to a program. For example, if 100 steps each are
allotted to programs 0 to 4, no steps can be allotted to program 5.
(Example) To assign memory number 5 to step 10 in program number 1 and set the
interval time to HOLD:
PED 1,10,5,HOLD
Response
Returns the contents of the step in response to PED? <program number>, <step
number>.
(Example) When "PED? 5,1" inquires about the contents of step 1 in program 5 and
step 1 is configured as memory 11 and an interval time of 5 seconds
A value of the
11,5
is returned.
PRGINS(PIN)
Inserts a step in a program and sets a memory number for the step.
During step insertion, the interval time is set to 1.0 s.
Message
Command message:
PIN <program number>, <step number>,
<memory number>
• Program data<program number NR1>, <step number NR1>,
<memory number NR1>
Set value: 0 to 99
Resolution: 1
• You cannot skip numbers while setting step numbers. You must either insert a
new step in a program or add it to the end of a list of steps.
• Up to 500 steps can be allotted to a program. For example, if 100 steps each are
allotted to programs 0 to 4, no steps can be allotted to program 5.
(Example) To assign memory number 5 to step between 9 and 10 in program num-
ber 1
PIN 1,10,5
NOTE
NOTE