Kikusui TOS6200A, Руководство пользователя

Страница: 9 / 154

TOS6200A/6210 General 1-3
1.2 Introduction and Features
This tester is used to perform earth continuity tests required for class-I devices for
various safety standards, including the IEC, EN, UL, VDE, BS, JIS, and the Electri-
cal Appliance and Material Control Law of Japan.
The tester must be used under the following conditions:
• Making test current constant
The test current for earth continuity tests has been made constant. This eliminates
the need to alter the test current, even if the resistance of the DUT (device under
test) changes.
• Safety output voltage
The constant current/constant voltage circuit provides fast response, preventing
generation of excessive output voltage even when output is interrupted during test-
ing. The tester complies with the limitations on no-load output voltages (6 V or
less,
12 V or less, and so on) required by many safety standards.
TOS6200A TOS6210
Test current value 3Aac to 30 Aac 6Aac to 60 Aac
Output terminal voltage 5.4 V or less
Resistance value
1.2

or less 0.6

or less
Maximum power 150 VA or less 220 VA or less
CH1: Voltage waveform
CH1: 5 V/div CH2: 50 A/div 10 ms/div
CH2: Current
waveform
Short circuit
TOS6210
CH1 : Voltage waveform
CH1: 5 V/div CH2: 50 A/div 10 ms/div
CH2 ：Current waveform Open
TOS6210