Kikusui TOS6200A, Руководство пользователя

Страница: 118 / 154

6-34 GPIB and RS-232C TOS6200A/6210
PRGNAME(PNAM)
Assigns a name to a program (up to 12 characters), or inquires about the program
name.
Message
Command message:
PNAM <program number>,”<program name>”
Query message:
PNAM? <program number>
• Program data<program number NR1>
Set value: 0 to 99
Resolution: 1
• Program data<program name>
Set value: Maximum number of characters, 12
ASCII Code 20H to 7EH
22H """, 27H "'", 2CH ",", and 40H "@" may not be
used. See Appendix A.2, “ASCII Codes 20H to 7EH.”
(Example) To assign a name of TEST1 to program number 1
PNAM 1,"TEST1"
Response
Returns the name of the program in response to PNAM? <program number>
(Example) When program 1 named TEST1 is inquired about with a "PNAM? 1"
A value of the
TEST1
is returned.
PRGNEW (PNEW)
Clears the contents of the program corresponding to a program number.
Message
Command message:
PNEW <NR1>
Program data
Set value: 0 to 99
Resolution: 1
(Example) To clear the contents of program 5
PNEW 5
PRGRETURN (PRET)
Sets ON/OFF for the repeat setting, or inquires about its ON/OFF status. (IF RET is
set to OFF, END is assigned to the end of the program.)
Message
Command message:
PRET <program number>,{0|1|OFF|ON}
Query message:
PRET? <program number>