Kikusui TOS6200A, Руководство пользователя

Страница: 147 / 154

TOS6200A/6210 Appendix A-5
IEC 60204-1
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
IEC 60335-1
Household and similar electrical appliances - Safety -
Part 1: General requirements
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for safety
Type test/ Routine test
Main test points A Between all accessible conducting parts of class-I devices requiring grounding
B External protective conductor terminal
Test current 10 A or greater (50 Hz or 60 Hz)
Allowable resistance value See Remarks (0.1

or equivalent provided that the test current is 10 A).
Test time 10 sec or longer
Remarks The measured voltage value at a test point must not exceed the following values.
When the effective sectional area of protective conductor is
1.0 mm
2
or less: 3.3 V maximum
1.5 mm
2
or less: 2.6 V maximum
2.5 mm
2
or less: 1.9 V maximum
4.0 mm
2
or less: 1.4 V maximum
6.0 mm
2
or less: 1.0 V maximum
Type test/ Routine test
Main test points A Between class-0 and -I devices and all accessible conducting parts of class-I devices
B Protective conductor terminal or protective grounding pin
Test current 1. 25 Adc or 25 Aac or
2. 1.5 times the rated device current,
whichever is greater.
Allowable resistance value 0.1

or less
Test time Not specified
Remarks • Use an AC or DC power supply with a no-load voltage of 12 V or less.
• In case of doubts, continue testing until a steady state is attained.
• Resistance measurements should not include the value for the AC power cord.
• Exercise care so that the test results are not affected by the contact resistance between the end of a measuring
probe and a metal part.
Type test/ Routine test
Main test points A Between all accessible conducting parts of class-I devices requiring grounding
B Protective conductor terminal or protective grounding pin
Test current 1. 25 A (50 Hz or 60 Hz) or
2. 1.5 times the rated device current,
whichever is greater.
Allowable resistance value 0.1

or less
Test time 5 sec to 10 sec
Remarks The no-load voltage must be 6 V or less.