Kikusui TOS6200A, Руководство пользователя

Страница: 136 / 154

8-2 Specifications TOS6200A/6210
8.1 Basic Performance
Item TOS6200A TOS6210
Output block
Current setting range *1
3.0 Aac to 31.0 Aac
(With respect to resistance resulting in
output power of the maximum rated
Output or less and an output terminal
voltage of 5.4 V or less) 6.0 Aac to 62.0 Aac
(With respect to resistance resulting in
output power of the maximum rated
Output or less and an output terminal
voltage of 5.4 V or less)
Resolution 0.1 A
Accuracy

(1% of s 0.2A)

(1% of s 0.4A)
Maximum rated output 150 VA (at output terminals) 220 VA (at output terminals)
Distortion factor
2% or less (with respect to 0.1

pure
resistance load of 10 A or greater)
2% or less (with respect to 0.1

pure
resistance load of 20 A or greater)
Frequency
50/60 Hz, sine wave (selectable)
Accuracy

200 ppm
Open terminal voltage
6 Vrms or less
Output method
PWM switching method
Output ammeter
Measurement range
0.0 Aac to 33.0 Aac 0.0 Aac to 66.0 Aac
Resolution
0.1 A
Accuracy

(1% of r 0.2 A)

(1% of r 0.4 A)
Response
Mean value response/rms value display (response time: 200 ms)
Hold function
The current measured at the end of test is held during the PASS or FAIL inteval
Output voltmeter
Measurement range
0.00 Vac to 6.00 Vac
Resolution
0.01 V
Offset cancel function
0.00 V to 5.40 V (Offset ON/OFF function provided)
Accuracy

(1 % of r 0.02 V)
Response
Mean value response/rms value display (response time: 200 ms)
Hold function
The voltage measured at the end of test is held during the PASS or FAIL inteval
Ohmmeter *2
Measurement range
0.001

to 1.200

0.001

to 0.600

Resolution
0.001

Offset cancel function
0.000

to 1.200

(Offset ON/OFF function provided)
0.000

to 0.600

(Offset ON/OFF function provided)
Accuracy

(2 % of r 0.003

)
Hold function The resistance measured at the end of test is held during the PASS or FAIL inteval
Pass/fail judgment function *3
Resistance value-based judgment Window comparator system
If a resistance value equal to or greater than the upper reference value is detected,
a FAIL determination is returned.
If a resistance value equal to or less than the lower reference value is detected, a
FAIL determination is returned.
If a resistance value has been judged as FAIL, the tester shuts off the output and
generates a FAIL signal.
If the set time elapses without abnormalities, the tester shuts off the output and
generates a PASS signal.
Setting range for the upper refer-
ence value (UPPER)
0.001

to 1.200

0.001

to 0.600

Setting range for the lower refer-
ence value (LOWER)
0.001

to 1.200

0.001

to 0.600

Resolution 0.001

Judgment accuracy

(2% of UPPER + 0.003

)