Keithley DMM7510, Справочное руководство

Страница: 643 / 1036

Section 8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
8-30 DMM7510-901-01 Rev. B / May 2015
bufferVar.fractionalseconds
This attribute contains the fractional second portion of the timestamp of each reading in the reading buffer.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) Yes Restore configuration
Instrument reset
Power cycle Not applicable Not applicable
Usage
fractionalSec = bufferVar .fractionalseconds[ N ]
fractionalSec The fractional second portion of the timestamp to 1 ns resolution
bufferVar The name of the reading buffer, which may be a default buffer (
defbuffer1
or
defbuffer2
) or a user-defined buffer
N The reading number
N
; can be any value from 1 to the number of readings in the
buffer; use the
bufferVar. n
command to determine the number of readings in the
buffer
Details
This read-only attribute is an array (a Lua table) of the fractional portion of the timestamps, in
seconds, when each reading occurred. Seconds are shown as fractions.
Example
reset()
testData = buffer.make(50)
trigger.model.load("SimpleLoop", 6, 0,
testData)
trigger.model.initiate()
waitcomplete()
print(testData.fractionalseconds[1])
printbuffer(1, 6, testData.fractionalseconds)
Create a reading buffer named
testData
and make six measurements.
Print the fractional portion of the timestamp
for the first reading in the buffer.
Example output:
0.647118937
Print the fractional portion of the timestamp
for the first six readings in the buffer.
Example output:
0.647118937, 0.064543,
0.48196127, 0.89938724,
0.316800064, 0.734218263
Also see
bufferVar.seconds (on page 8-35)
buffer.delete() (on page 8-16)
buffer.make() (on page 8-18)
bufferVar.clear() (on page 8-24)
print() (on page 8-231)
printbuffer() (on page 8-232)
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)