Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Section 3: Functions and features
DMM7510-901-01 Rev. B / May 2015
3-23
Using TSP commands to set a buffer fill mode:
To set the
testData
reading buffer fill mode to continuous, send the following command:
testData.fillmode = buffer.FILL_CONTINUOUS
To set the
defbuffer1
reading buffer fill mode to fill once, send the following command:
defbuffer1.fillmode = buffer.FILL_ONCE
To print the
defbuffer1
fill mode setting, send the following command:
print(defbuffer1.fillmode)
Where a return of
0
indicates the buffer is set to fill once and a return of
1
indicates the buffer is set to
fill continuously.
Selecting a buffer
The default reading buffer is
defbuffer1
. You can also use a different buffer (
defbuffer2
or a
user-defined reading buffer).
When you use remote commands to create buffers, the buffers are available to the system and can
be used with any command that takes a buffer parameter. A newly created buffer automatically
becomes the active buffer. If the active buffer is deleted,
defbuffer1
becomes the active buffer.
Using the front panel:
1. Press the
MENU
key.
2. Under Measure, select
Reading Buffers
. The MANAGE READING BUFFERS window is
displayed.
Figure 113: MANAGE READING BUFFERS screen
3. Select a reading buffer from the list. For example, select
testData
.
