Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Section 2: General operation
DMM7510-901-01 Rev. B / May 2015
2-99
Setting input impedance using SCPI commands:
Refer to
[:SENSe[1]]:<function>:INPutimpedance
(on page 6-83).
Setting input impedance using TSP commands:
For the DC voltage function, refer to
(on page 8-156).
For the digitize voltage function, refer to
(on page 8-91).
AC voltage measurements
This section describes how you can set up AC voltage measurements from the front panel.
Do not apply more than 1000 V
peak
between INPUT HI and LO. Failure to observe this caution may
result in instrument damage.
AC voltage measure connections
Figure 58: Front panel connections: AC voltage measurement
Figure 59: Rear panel connections: AC voltage measurement
