Section 3: Functions and features
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
3-46
DMM7510-901-01 Rev. B / May 2015
From the front panel:
1. Press the
MENU
key.
2. Under System, select
Calibration
.
3. Select
Scheduling Action
. To have the instrument:
Prompt you to run auto calibration: Select
Notify
.
Run auto calibration at a specific time: Select
Run
.
To stop scheduling: Select
None
. If you select None, you do not need to make additional
settings.
4. Select
Scheduling Interval
.
5. Select the interval.
6. Select
Scheduled Time
to select the time when the auto calibration will run or when you will be
prompted to run it.
To review the next schedule time and date, see the information listed next to Next Run.
Using SCPI commands:
Refer to
(on page 6-21).
Using TSP commands:
Refer to
(on page 8-13).
Reviewing calibration information
The Calibration screen displays information about the last autocalibration and factory calibrations that
were run and the present status. For detail on this screen, refer to
For autocalibration, you can also access this information from the commands in the SCPI
(on page 6-15) or the TSP
acal.*
commands.
