Karl Storz Image 1 HUB, Инструкция по эксплуатации

Страница: 141 / 176

130
Options Menu
Exit
Camera Functions...
Patient Information...
SCB...
Image Capture
Setup Wizard (CCU))
Setup Wizard
(Camera Head)
Camera Functions
Exit
White Balance
Color Bars
On/(Off)
Clear
Button Settings
(Default)
Brightness (Medium)
Enhancement (Low))
Shutter (Auto)
Button Hints On/(Off)
Program Head Buttons
Light Source (x%)
Insufflator
see CCU and Camera
Head Setup Wizards
Patient Information
Exit
Patient Information Display
On/(Off)
Patient Information
Page Select
Clear All Pages
Edit Patient Information
SCB
Exit
SCB Text (On)/Off
Configure SCB Display
SCB Warnings/Status
(On)/Off
Insufflator
Exit
Gas On/(Off)
Flow (x l/min)
Pressure (x mm Hg)
Volume Reset
Pressure
:
18 mm Hg
⑤
15 mm Hg
⑤
12 mm Hg
⑤
8 mm Hg
⑤
Standby 75 %
25 % 100 %
50 %
Button Settings
Default
Capture Still Only
White Balance
Dual White Balance
Light Mode
White Balance
Low Peak
Medium Small Scope A
⑦
High Small Scope B
⑦
Off
Low
High
Fiberscope Filter A
Fiberscope Filter B
Auto 1/1000
1/50 1/1500
1/85 1/2100
1/125 1/2800
1/175 1/4000
1/250 1/6000
1/350 1/8500
1/500 1/12000
1/700 1/17000
Program Head Buttons
Left Button
Capture Still
Right Button
White Balance
1 5
2 6
3 7
4 8
5 10
Options List
Camera Functions
White Balance
Color Bars
Button Settings
Brightness
Kontrastanhebung
Shutter
Button Hints
Program Head Buttons
Split Screen Enhancement
②
Light Source
Insufflator
⑥
Gas
⑥
Flow Control
⑥
Pressure Control
⑥
Volume Reset
⑥
Patient Information
③
Clear All Pages
③
Patient Information Display
③
Patient Information Page Select
③
Edit Patient Information
③
SCB
SCB Text
Configure SCB Display
SCB Warnings/Status
Image Capture Menu
Capture Still
Capture Video
Print Now
SCB Display (Devices
)
Device name (CCU)
Device name (Endoflator)
Device name (Thermoflator)
Device name (Light Source)
(Up to 8 devices displayed)
Exit
SCB Display (Device Name)
Device display parameter (display region)
Device display parameter (display region)
Device display parameter (display region)
Device display parameter (display region)
(Up to 8 devices displayed)
Exit
U
U
U
U
U
U
Accessing the options menus • either by simultaneously press SHIFT + ENTER on the keyboard • or by pressing and holding the center camera head button (at least 7 seconds)
only available for connected SD camera head (Standard Definition) , not available for HD camera heads (High Definition)
③
only available if a keyboard is connected to the CCU (IMAGE 1 HUB HD / IMAGE 1 Pure HD)
• for Thermoflator®: High 30 l/min -- Medium 15 l/min -- Low 2 l/min • for Endoflator®: High 20 l/min -- Medium 10 l/min -- Low 2 l/min • for Endoflator®:
selectable values depend on camera head settings. To change the settings click on ’Setup Wizard Camera Head’ in the Options Menu and then click on ’Next’ twice. Now change the settings
only available when activated in the insufflator menu. To change the settings click on ’Setup Wizard Camera Head’ in the Options Menu, then click on ’Next’ twice. Now change the settings.
applies to the H3-Z, H3-ZI and H3-P camera heads
The following menu diagram applies to the H3-ZI HD camera head. The menus for the SD camera heads are similar. The key difference: The menus for the SD camera heads do not include the Insuf fl ator menu.
Technische
Beschreibung
Menü-Übersichten
Technical description
Menu diagrams
Descripciones
técnicas
Sinopsis de menús
Flow:
High
④
Medium
④
Low
④
Options Menu
(to access see - at the
bottom of this page)
Image Capture
Exit
Capture Still
Capture Video
Print Now
Image Capture Settings...