INVT GD300-004G-4, Руководство по эксплуатации

Страница: 137 / 312

Goodrive300 inverters Function codes
136
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
on the MODBUS fieldbus can receive the frame,
but the salve doesn’t answer.
The communication of the drive is unique in the
communication net. This is the fundamental for the
point to point communication between the upper
monitor and the drive.
Note: The address of the slave cannot set to 0.
P14.01
Communic
ati baud
ratio
Set the digital transmission speed between the
upper monitor and the inverter.
0:1200BPS
1:2400BPS
2:4800BPS
3:9600BPS
4:19200BPS
5:38400BPS
6:57600BPS
7:115200BPS
Note: The baud rate between the upper PC and the
inverter must be the same. Otherwise, the
communication is not applied. The bigger the baud
rate, the quicker the communication speed.
4
○
P14.02
Digital bit
checkout
The data format between the upper monitor and
the inverter must be the same. Otherwise, the
communication is not applied.
0: No check (N,8,1) for RTU
1:Odd check (E,8,1) for RTU
2:Even check (O,8,1) for RTU
3:No check (N,8,2) for RTU
4: Odd check (E,8,2) for RTU
5:Even check(O,8,2) for RTU
1
○
P14.03
Answer
delay
0~200ms
The interval time when the drive receives the data
and sent it to the upper monitor. If the answer delay
5
○