INVT GD300-004G-4, Руководство по эксплуатации

Страница: 117 / 312

Goodrive300 inverters Function codes
116
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
reference.
If the PID feedback changes 100% during the time,
the adjustment of integral adjustor (ignoring the
proportional effect and differential effect) is the
Max. Frequency (P00.03) or the Max. Voltage
(P04.31). Longer the integral time, stronger is the
adjusting.
Setting range: 0.01~10.00s
P09.07
Sampling
cycle(T)
This parameter means the sampling cycle of the
feedback. The adjustor operates each sampling
cycle. The longer the sapling cycle is, the slower
the response is.
Setting range: 0.00~100.00s
0.10s
○
P09.08
PID control
deviation
limit
The output of PID system is the maximum
deviation relative to close loop reference. As shown
in the diagram below, PID adjustor stops to work
during the deviation limit. Set the function properly
to adjust the accuracy and stability of the system.
Setting range:0.0~100.0%
0.0%
○
P09.09
Output
upper limit
of PID
This parameter is used to set the upper and lower
limit of the PID adjustor output.
100.0 % corresponds to max. frequency or the
100.0%
○