INVT GD300-004G-4, Руководство по эксплуатации

Страница: 266 / 312

Goodrive300 inverters Appendix A
265
Configuration parameters of EC-TX-103 communication card:
Parameter number Parameter name Optional setting Factory setting
0 Module type Read only PROFIBUS-DP
1 Node address 0~99 2
0:9.6
1:19.2
2:45.45
3:93.75
4:187.5
kbit/s
5:500
6:1.5
7:3
8:6
9:9
2 Baud rate setting
Mbit/s
10:12
6
3 PZD3 0~65535 0
4 PZD4 Ibid 0
… …… Ibid 0
10 PZD12 Ibid 0
2. Module type
This parameter shows communication module type detected by inverter; users can not
adjust this parameter. If this parameter is not defined, communication between the modules
and inverter can not be established.
3. Node address
In PROFIBUS network, each device corresponds to a unique node address, you can use the
node address selection switch to define node address (switch isn’t at 0) and the parameter is
only used to display the node address.
If node address selection switch is 0, this parameter can define node address. The user can
not adjust the parameter by themselves and the parameter is only used to display the node
address.
4. GSD file
In PROFIBUS network, each PROFIBUS subsidiary station needs GSD file "device
description document" which used to describe the characteristics of PROFIBUS-DP devices.