INVT GD300-004G-4, Руководство по эксплуатации

Страница: 119 / 312

Goodrive300 inverters Function codes
118
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
change with the trend quickly.
LED tens:
0:The same with the setting direction; if the output
of PID adjustment is different from the current
running direction, the internal will output 0 forcedly.
1:Opposite to the setting direction
P10 Group Simple PLC and multi-step speed control
P10.00 Simple PLC
0: Stop after running once. The inverter has to be
commanded again after finishing a cycle.
1: Run at the final value after running once. After
finish a signal, the inverter will keep the running
frequency and direction of the last run.
2: Cycle running. The inverter will keep on running
until receiving a stop command d. And then, the
system will stop.
0
○
P10.01
Simple
PLC
memory
0: Power loss without memory
1:Power loss memory
；
PLC record the running
stage and frequency when power loss.
0
○
P10.02
Multi-step
speed 0
0.0%
○
P10.03
The
running
time of step
0
0.0s
○
P10.04
Multi-step
speed 1
0.0%
○
P10.05
The
running
time of step
1
0.0s
○
P10.06 Multi-step
The frequency setting range of stage 0~15:
-100.0~100.0%
，
100.0% of the frequency setting
corresponds to the Max. Frequency P00.03.
The operation time setting of stage 0~15: the time
unit is determined by P10.37. When selecting
simple PLC running, set P10.02~P10.33 to define
the running frequency and time of all stages.
Note: The symbol of multi-step determines the
running direction of simple PLC. The negative
value means reverse rotation.
0.0%
○