INVT GD300-004G-4, Руководство по эксплуатации

Страница: 60 / 312

Goodrive300 inverters Function codes
59
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
for P01.24
P01.15
Stopping
speed
0.00~100.00Hz 0.50 Hz
◎
P01.16
Detection
of stopping
speed
0: Detect according to speed setting (no stopping
delay)
1: Detect according to speed feedback (only valid
for vector control)
0
◎
P01.17
Detection
time of the
feedback
speed
If set P01.16 to 1, the feedback frequency is less
than or equal to P01.15 and detect in the set time
of P01.17, the inverter will stop; otherwise the
inverter will stop after the set time of P01.17.
Setting range:0.0~100.0s (only valid when
P01.16=1)
0.05s
◎
P01.18
Terminal
running
protection
when
powering
on
When the running commands are controlled by the
terminal, the system will detect the state of the
running terminal during powering on.
0: The terminal running command is invalid when
powering on. Even the running command is
detected to be valid during powering on, the
inverter won’t run and the system keeps in the
protection state until the running command is
canceled and enabled again.
1: The terminal running command is valid when
0
○