INVT GD300-004G-4, Руководство по эксплуатации

Страница: 61 / 312

Goodrive300 inverters Function codes
60
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
powering on. If the running command is detected to
be valid during powering on, the system will start
the inverter automatically after the initialization.
Note: this function should be selected with
cautions, or serious result may follow.
P01.19
Action if
running
frequency<
lower limit
frequency
(valid >0)
This function code determines the running state of
the inverter when the set frequency is lower than
the lower-limit one.
0: Run at the lower-limit frequency
1: Stop
2: Hibernation
The inverter will coast to stop when the set
frequency is lower than the lower-limit one.if the set
frequency is above the lower limit one again and it
lasts for the time set by P01.20, the inverter will
come back to the running state automatically.
0
◎
P01.20
Hibernation
restore
delay time
This function code determines the hibernation
delay time. When the running frequency of the
inverter is lower than the lower limit one, the
inverter will pause to stand by.
When the set frequency is above the lower limit
one again and it lasts for the time set by P01.20,
the inverter will run automatically.
Note: The time is the total value when the set
frequency is above the lower limit one.
0.0s
○