INVT GD300-004G-4, Руководство по эксплуатации

Страница: 70 / 312

Goodrive300 inverters Function codes
69
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
coefficient
of
electromoti
on slip
P03.08
Compensat
ion
coefficient
of braking
slip
speed control accuracy of the system. Adjusting
the parameter properly can control the speed
steady-state error.
Setting range:50%~200%
100%
○
P03.09
Current
loop
percentage
coefficient
P
1000
○
P03.10
Current
loop
integral
coefficient
1
Note:
1 These two parameters adjust the PI adjustment
parameter of the current loop which affects the
dynamic response speed and control accuracy
directly. Generally, users do not need to change
the default value.
2 Only apply to the vector control mode without PG
0(P00.00=0).
Setting range:0~65535
1000
○
P03.11
Torque
setting
method
This parameter is used to enable the torque control
mode, and set the torque.
0:Torque control is invalid
1:Keypad setting torque(P03.12)
2:Analog AI1 setting torque
3:Analog AI2 setting torque
4:Analog AI3 setting torque
5:Pulse frequency HDI setting torque
6:Multi-step torque setting
7:MODBUS communication setting torque
8:PROFIBUS\CANopen communication setting
torque
9:Ethernet communication setting torque
10:Reserved
0
○