SECTION 3—SAFETY INSPECTION
Part No 1122167
17
Zoom 300 and Zoom 400
SECTION 3—SAFETY INSPECTION
Checklist
These adjustments should be made whenever you service this product, especially as a
part of the initial set up. Follow these maintenance procedures:
WARNING
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑
Ensure powered scooter drives straight (no excessive drag or pull to one side).
❑
Check frame for damage and corrosion.
❑
Ensure that the brake release lever is easy to engage/disengage.
❑
Ensure that tiller adjustment handle engages and disengages properly and securely.
❑
Ensure that the scooter stops completely when throttle is released (i.e., does not
continue to roll as if the throttle is activated).
❑
Clean upholstery and armrests.
❑
Ensure adjustable height arms operate and lock securely.
❑
Ensure armrest pad sits flush against arm tube.
❑
Inspect the seat upholstery for rips and tears.
❑
Inspect seat swivel for release and engagement (seat locks into the determined swivel
positions).
❑
Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑
Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑
Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
❑
Ensure that the seat mounting hardware is securely tightened.
❑
Inspect for excessive side movement or binding when the drive wheels are raised and/
or turned.
❑
Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front
wheel should come to a gradual stop.
❑
Check brake for binding or interference with travel.
❑
Check the front fork for damage or corrosion.
