GSK 980MDc, Руководство пользователя

Страница: 450 / 473

Appendix
431
Appendix
output, and it is cancelled after a setting time by the PLC data DT0018. If the DT0018 setting time is not yet
up, M33 is executed to cancel the lubrication output.
2.
Automatic lubrication
After the CNC system power on, it is lubricating for a time set by DT0017, then the lubrication output
stops. After a time set by DT0016, the lubrication is output again, and it cycles by sequence. In automatic
lubrication, M32, M33 commands as well as the lubrication key on the panel are all inactive.
11.2.8 Block Skip
If a block in a program needs not to be executed and deleted, the block skip function can be selected.
When the block is headed with “/” sign, and the block skip switch is turned on (machine panel key or
external input of the block is active), the block will be skipped without execution in auto running.
z
Related signal
z
Function description
1. When the block skip signal is valid, the block with “/” sign is skipped without being executed.
2. The block skip function is only valid in Auto, MDI and DNC mode.
11.2.9 Machine Lock
z
Related signal
z
Function description
1. Machine lock is valid in any mode.
2. The state of the machine lock cannot be changed in program executing.
Signal
type
Symbol Significance Pin-out
No.
PLC
State
C NC
Diagnosis
Input
signal
Block skip key on the machine panel X18.7
Output
signal
Block skip indicator on the machine
panel
Y18.6
Signal
type
Symbol Significance Pin-out
No.
PLC
State
C NC
Diagnosis
Input
signal
Machine lock on the machine panel
X19.0
Output
signal
Machine lock indicator on the
machine panel
Y18.5