GSK 980MDc, Руководство пользователя

Страница: 297 / 473

GSK980MDc Milling CNC System User Manual
278
Ⅱ
Operation
1. In MDI mode, press or key to move the cursor to the parameter to be set,
2. Input corresponding values,
3. Press
key
， and the setting is finished.
B
：
Significance of graphic parameter
Coordinate selection: Display view angle of the graphic path can be selected by setting different values.
Corresponding coordinate for 0~7is as follows.
Scaling: Display the scaling of current graphic path.
Graphic center: Display the center of each axis.
Maximum, minimum: Set the maximum and minimum scope can be displayed by each axis.
C
：
Graphic track operation
Graphic track is as follows:
Vertical move: Display upper and lower part of the graphic.
Horizontal move: Display right and left part of the graphic.
Scaling: Display scaling of current graphic.
Absolute coordinate: Display the absolute coordinate of the program.
Soft key functions in graph page:
S
： Start drawing, S is highlighted by pressing S key. Display drawing track.
T
：
Stop drawing, T is highlighted by pressing S key. I t stops drawing.
R ： Clear graphic track, clear graphic track displayed before.
K
：
Switch view angle, coordinate value can be switched between 0~7 by pressing K key each time.
J ： Display graphic in the center, that is, vertical move and horizontal move are 0.
I
：
Scale up the track, the graphic is scaled up 2 fold by pressing I key once.
M
：
Scale down the track, the graphic is scaled down 2 fold by pressing M key once.
Direction key: move the graph up, down left and right.
D
：
Graph centering and feature.
J
：
Graph centering display, i.e. vertical translation and horizontal translation are 0.
G: Graph feature G, displaying a dialog at lower right corner of the following figure, and displaying
vertical-horizontal proportion and movement space.
The following is an example of graph path: