GSK 980MDc, Руководство пользователя

Страница: 410 / 473

Appendix
391
Appendix
Alarm
No.,
TYPE
CLR
WAY
Alarm Message
096,0 0 Nesting fold number of subprogram has exceeded 4
097,0 0 The main program is called.
099,0 0 Macro cannot be called ,or M98 and M99 cannot be commanded in offset
100,0 0 Skip(GOTO,DO,END) disabled in TNR offset
101,0 0 The format of macro is wrong.
102,0 0 The label of DO or END is not 1, 2 or 3 in using macro.
103,0 0 The format of DO or END error in using macro.
104,0 0 The bracket of macro is not suitable, or the format of macro is wrong.
105,0 0 The divisor in using Macro is not equal to zero.
106,0 0 The format of ATAN is wrong in using macro.
107,0 0 The inverse logarithm of LN is wrong (<=0).
108,0 0 The evolution of negative is forbidden.
109,0 0 The result of TAN is a infinitude
110,0 0 The operator of ASIN or ACOS is out of range (<-1, or >1).
111,0 0 The type of variable is wrong or not exists.
112,0 0 The block called by GOTO or M99 is overflow or not exist.
113,0 0 M98 or M99 cannot be executed when G66 is called.
114,0 0 G65 or G66 must be defined ahead.
117,0 0 Null(#0) can't as a result of macro statement
118,0 0 I,J,K number in G65,G66 over 10
119,0 0 Macro program called by P is out of range in G65,G66
120,0 0 The variable only can be read not be written.
121,0 0 The value assigned to system variables in macro statement cannot be null.
122,0 0 P or G65 H operation not specified in macro call(G65 or G66)
123,0 0 G65 H_ format is wrong
124,0 0 Illegal H is commanded in G65
125,0 0 Proper operands and number are needed in macro
126,0 0 Alarm No. specify by G65 H99 beyond range(0~99)
127,0 0 Operand not integer in macro statement
128,0 0 Operand not binary in macro statement
129,0 0 Radius offset is pre-read, right macro variable can’t be got.
130,0 0 Spindle encoder pulse is out of 100~5000
131,0 0 Set rotary axis active before using CS axis
132,0 0 Operand value too long in macro statement
133,0 0 Macro logic operation data error (Logic operation operand or result is not 0 or 1)
150,0 0 The mirror, scale, and rotation commands can’t be defined with 00, 01,
07,08,11,12,14,16,22 group instruction in one segment.
151,0 0 When mirror, scale, or rotation function is valid. G92 can’t be defined.
152,0 0 When mirror, scale, or rotation function is valid.G28,G29,G30 can’t be defined
153,0 0 When mirror, scale, or rotation function is valid.G52~G59 can’t be defined
154,0 0 When mirror, scale, or rotation function is valid.G17 ～ G19 can't be defined
155,0 0 The mirror, scale, and rotation functions can’t be founded if cutter comp.C is