GSK 980MDc, Руководство пользователя

Страница: 304 / 473

Chapter 10 Document Management
285
Ⅱ
Operation
9.2.1 Entry of Operation Level
1. After entering the PASSWORD SETTING page, move the cursor to the “INPUT PASSWORD:”
line;
2. Key in the password (an “*”sign added each time inputting a character)
3. Press key to finish the inputting, and it will enter the corresponding password level.
The user can press to degrade the higher operation level to the lower, but the user must
input the password again before degradation.
Note: The length of this GSK980MDc system password corresponds to the operation level, which can’t be added or
decreased by user at will.
Operation level
Password length
Initial password
3
rd
level 5 digits 12345
4
th
level 4 digits 1234
5
th
level 3 digits 123
6
th
level None None
Example: The current CNC level is the 4
th
level, as the following page shows. The 3
rd
level
password of CNC is 12345, please alter the current level to the 3
rd
level.
Move the cursor to the “INPUT PASSWORD:” line, key in 12345, then press the key, the CNC
prompts “Modify parameter and edit program”, “Password passed”, and the current level is the 3
rd
level. The
page is as follows: