GSK 980MDc, Руководство пользователя

Страница: 274 / 473

Chapter 7 Auto Operation
255
Ⅱ
Operation
4 ） Press or key to display the next or previous program;
5
）
Repeat step 3 and 4 to display the saved programs one by one.
6.4.3 Soft Function Key Search
1) Select Edit or Auto mode;
2
）
Press and select
；
3
）
Input a program number following the address O
；
4
）
Press or
，
and the screen displays the searched program;
Note: In Step 4, if the program does not exist, a new program will be created by CNC system after
key is pressed
6.4.4 Select File by Using File List
1 ） In local directory page （ in Edit or Auto mode ） as follows:
2
）
Select program to be opened by pressing or key.
3) Open program by pressing key.
6.5 Execution of a Program
After the program to be executed is selected by the method in Section 6.4, select the Auto mode, then
press key (or press external cycle start key), the program will be executed automatically.
6.6 Rename of a Program
1
）
Enter local program page in Edit mode;
2
）
Press and key a new program name;
3
）
Press key.