GSK 980MDc, Руководство пользователя

Страница: 469 / 473

GSK980MDc Milling CNC System User Manual
450
Appendix
parameter unless really necessary.
¾ parameters setting for CNC calling subroutine:
6044 6
6045 9000
6046 1
The setting completed, tool change macro program P9001can be called by M6, no need by M98.
„
Toolpot back to 0 operations
It is only in back to reference point mode, do the toolpot back to zero position can be implemented.
So when execute this function, please make sure whether the zero signals exist or not. CNC cannot
implement this function without a zero signal.
1: only when the toolpot is back in position, that do toolpot can back to zero position, otherwise
not.
2: When the toolpot wants back to zero position, the CNC will detect X0.0 signal. If this signal
turns one circle and the toolpot keeping spinning and cannot find 0 point, please check the zero
signal in machine tools electric is correct or not.
3: After the toolpot back to zero point, the target and current toolcases data will be all set to1,
indicating that the current toolcase No. 0 is 1.If the data corresponding to the toolpot is not 1,
please check machine tools electric is correct or not.
4: there is no key in 980MDc-V panel. If other keys needed to be set, the ladder diagram
should be altered.
„
Auto toolpot rotation
Input M60 into the MDI or AUTO mode, to ensure safety, please move the clamping axis (Z axis)
to the 3
rd
reference point, otherwise M60 will not complete the rotation. In debugging, when start
M60 to rotate toolpot, please set K12.1 parameter to 1(for safety, setting this parameter is not
recommended). In the situation that both of Z axis is moved to the 3
rd
reference and the parameter
is set, but still the toolpot cannot rotate:
1:
please make sure the tool magazine parameter K11.6 and K11.7 set in turret tool magazine
valid;
2: after inputting the instruction and starting the program, make sure that D408 and D409 are the
same in Ladder->PLC data->D setting. If they are same, please input a
Ｔ
instruction different from
D408, then start toolpot rotating.
3: if the above measures are all taken, but still the toolpot cannot rotate. Please check up in
ladder->PLC when start toolpot protestation, to see Y1.6 or Y1.7 has an output or not. If anyone of
them has an output and the toolpot is still, please check the machine tools electric starts the toolpot
rotation function or not.
4: when start toolpot rotation, the toolpot only moves a tool distance every time and only rotates in
one direction.
5: there is no key in 980MDc-V panel. If other keys needed to be set, the ladder diagram
should be altered.
„
Manual spindle releasing/clamping tool
Please make sure there is no tool in spindle when test the degree of tightness of the
spindle to avoid tool damage
.