GSK 980MDc, Руководство пользователя

Страница: 222 / 473

Chapter 1 Operation Mode and Display
203
Ⅱ
Operation
1.3.6 Status parameter, data parameter, often used parameter and pitch compensation
page
Press to enter parameter interface including status parameter(bit parameter), data parameter,
often used parameter and pitch compensation page, which can be viewed by pressing corresponding soft
key.
1. Status parameter page
In the system page, press to enter parameter setting page as follows:
There are two lines to display parameter contents, the first displays English abbreviations of all bits of
the parameter where the current cursor is, and display of their parameter bit can be changed by pressing
or ; the second displays Chinese definitions of all bits of the parameter where the cursor is.
The page displays detailed information of user parameters, the system parameters can be set or
modified, the parameter currently set by user can be backup, the user can resume the parameter to the one
that the system defaults or resume it to the one that the user backups.
In MDI mode, the PARA. SWITCH is ON, the operation authority is equal to or more than 3-level, the
user can execute parameter setting. Select the required modification parameter by pressing , ,
, or press to input the required parameter serial number, and then press to
position the cursor to the parameter. As the following figure, the cursor is No. 0001, the user presses the
numerical key to input 8-digit 2 decimal numerical value, presses to confirm the setting completion;
when the input value is less than 8-digit, 0 is added to the high-order position.