GSK 980MDc, Руководство пользователя

Страница: 271 / 473

GSK980MDc Milling CNC System User Manual
252
Ⅱ
Operation
Steps:
1
）
Select the PRG CONTENT page in Edit mode;
2
）
Press key to delete the character before the cursor; press key to delete the
character where the cursor locates.
6.1.6 Modification of a Character
Cancel or delete the character and re-enter new ones.
6.1.7 Deletion of a Single Block
This function is only applied to the block with a block No.(N command) , which is at the head of a line
and followed by blocks which are divided by space.
Steps:
1
）
Select the PRG CONTENT page in Edit mode;
2
）
Press to enter PRG CONTENT page, and press to delete the current bock.
6.1.8 Deletion of Blocks
Steps
1
）
Select the PRG CONTENT page in Edit mode;
2
）
Press key to input the required characters, press
to the blocks between the cursor
starting and finding the required deletion character.
6.2 Program Note
To facilitate the user to search, manage and edit program, the system provides program name note and
block note functions.
6.2.1 Note for Program Name
The program note can be added in the brackets behind it. For example: program O0002 is used for
machining bolt holes, the note can be added in program contents as follows:
1 ） Press PROGRAM key, select , press PAGE UP/DOWN as follows: