GSK 980MDc, Руководство пользователя

Страница: 298 / 473

Chapter 10 Document Management
279
Ⅱ
Operation
9.1.3 Parameter Setting
By the parameter setting, the characteristics of the drive unit and machine can be adjusted. Refer to
Installation and Connection about their meanings.
Press key to enter the Parameter interface, then press or key to switch the
parameter page, the figure is as follows:
A: Alteration of bit parameter
1. Byte alteration
1
）
Turn on the parameter switch
2
）
Enter the MDI mode
3
）
Move the cursor to the parameter No. to be set
Method 1: Press or key to enter the page containing the parameter to be set,
press or key to move the cursor to the No. of the parameter to be
set;
Method 2: Press address key
, key in parameter No, then press
key.
4
）
Key in the new parameter value