GSK 980MDc, Руководство пользователя

Страница: 317 / 473

GSK980MDc Milling CNC System User Manual
298
Ⅱ
Operation
Parameter More than 3-level (including 3-level)
Part program More than 4-level (including 4-level)
Resume
operation
Ladder diagram More than 2-level (including 24-level)
Note: 2-level or above operation level is needed for part program operation above number 9000.
11.2 Operation Instructions
¾ Parameter backup and resume
Backup parameters: Copy current all parameter states and values to U:\gsk980MDc_backup\user\
in the U disk in the form of file Param.par
，
Tcomp.cmp
，
Wcomp.wmp. If the above-mentioned file does
not exist, set up a new one: If the file exists, this file will be overwritten by the new one.
Resume parameters: Copy parameter files in the U disk memory unit U:\gsk980MDc_backup\user\
to the CNC system to resume the system parameter. Resume operation cannot be done if the
above-mentioned path is moved or altered or irregular file name is renamed.
Note: Repower the CNC system after parameter load is successful.
¾
Part program resume and backup
Backup part programs: Copy all part programs of current system to U:\ gsk980MDc_backup\
gsk980MDc_backup \ NCPROG\ of USB memory unit in the form of file .CNC. If the above-mentioned
file does not exist, set up a new one: If the file exists, this file will be overwritten by the new one.
Resume part programs: Copy all part programs from the U disk memory unit U:\
gsk980MDc_backup\user\NCPROG\ to the CNC system to resume the part program. Resume
operation cannot be done if the above-mentioned path is moved or altered or irregular file name is
renamed.
¾ Ladder diagram (PLC) resume and backup
Ladder diagram backup: Copy all ladder diagrams (.ldx file) of the current system to
U:\gsk980MDc_backup\user\of the U disk memory unit. If the above-mentioned file does not exist, set
up a new one: If the file exists, this file will be overwritten by the new one.
Resume ladder diagram: Copy parameter files from the U disk memory unit
U:\gsk980MDc_backup\user\ to the CNC system to resume the ladder diagram. Resume operation
cannot be done if the above-mentioned path is moved or altered or irregular file name is renamed.
Note: Repower the CNC system after the ladder diagram restore is successful.
¾ Resume operation
To convenient to the user resuming backup file in different directory, the user can select the resume
directory.
gsk980MDc_backup\
。
Note: The user can select the resume page which only lists file directory of its directory name including ‘MD’.
11.3 Backup Operation Example
1. Backup log
（
take an example of log
）；
2. Press to enter the page, and the user can execute the following operations including
canceling the selection, all selection and so on;
3. In MDI mode, press [IN] to select the log, and then press [OUT] to execute backup to successfully
backup the log to the U disk. When the backup fails, the system prompts the fail as follows: