manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 94 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 94

Operator Controls

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

3–36

Control Panel Map (cont’d)

1.

Alphanumeric Keyboard (see 

3–35

).

2.

Patient Information (see 

4–3

).

3.

Probe Selection (see 

3–30

).

4.

Soft Menu (see 

3–38

).

5.

Doppler CFM (see 

5–31 

and 

5–58

).

6.

User Define (see 

14–101

).

7.

Mode Display Record (see 

3–41

).

8.

Measurements/Annotations (see 

3–43

).

9.

TGC and Acoustic Output (see 

5–10

).

10. VCR (see 

3–45

).

Key Illumination

The front panel keys are all illuminated according to their
availability.

Disabled or unavailable selections have the key
illumination turned off.

Enabled or available selections have the key illumination
half lighted (back lit).

Active or cancelable selections have the key illumination
fully lighted.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов