GE Medical Systems 500 Скачать руководство пользователя страница 46

Страница: 46 / 636

Safety Precautions

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

2–16



Classifications (cont’d)

5.1 Acceptable Devices

The devices shown in Figure 2–1 are specified to be suitable for
use within the PATIENT ENVIRONMENT.

DO NOT connect any probes or accessories without approval
by GE.

Please refer to Peripheral Devices on

13–5

and Assistance on

16–38

for more details. The devices listed have been tested

and verified to be compatible with the LOGIQ



500 system.

5.2 Unapproved Devices

The user takes All Responsibility for connecting unapproved
devices.

If devices are connected without the approval of GE, the
warranty will be INVALID.

Any device connected to the LOGIQ



500 must conform to one

or more of the requirements listed below:

IEC 50, IEC 65, IEC 335, IEC 348, IEC 414, IEC 820,
IEC 950, IEC 1010–1, ISO 7767, ISO 8185, ISO 8359
or IEC 60601–1.

The devices shall be connected to PROTECTIVE
EARTH (GROUND).

CAUTION

Содержание 500





























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 500

Отзывы:

GE Medical Systems 500, Руководство пользователя, Страница: 46 / 636

Результаты поиска

Содержание 500

Отзывы: