GE Medical Systems 500 Скачать руководство пользователя страница 581

Страница: 581 / 636

System Care and Maintenance

LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0

16–15



Cleaning the system (cont’d)

Foot Switch

To clean the foot switch:

Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non

abrasive soap and water

solution.

Wipe the external surfaces of the unit then dry with a
soft, clean, cloth.

VCR

To clean the VCR:

Turn off the VCR power. If possible, disconnect the
power cord.

Wipe the external surfaces of the unit with a soft, clean,
dry cloth.

NOTE: Do not use a wet cloth or any cleaning fluid because it

may enter and damage the unit.

Clean the record and playback heads with a soft,
non

abrasive cleaning system, according to the

manufacturer’s instructions.

See the VCR’s Operator Manual.

Multi Image Camera

To clean the MIC:

Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non

abrasive soap and water

solution.

Wipe down the top, front, back, and both sides of the
unit.

Review the Multi Image Camera’s Operator Manual for details.

For more

information

For more

information

Содержание 500





























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 500

Отзывы:

GE Medical Systems 500, Руководство пользователя, Страница: 581 / 636

Результаты поиска

Содержание 500

Отзывы: