GE Medical Systems 500 Скачать руководство пользователя страница 598

Страница: 598 / 636

Troubleshooting

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

16–32



Operation Guide Message Description

Category

Problem/

Message

Possible

Cause

Possible

Corrective Action

Scan Guide

Invalid CFM image was
cleared.

The PRF is changed,
and invalid CFM image
is cleared.

Miscellaneous

In progress. Please
wait.

The system needs
several seconds to do
something.

VCR Search Guide

Searching.

The VCR is searching
the tape.

Search was completed.

The VCR search is
completed.

Requested information
doesn’t exist on the tape.

The patient image
doesn’t exist on the tape.

Perform a system
search.

Requested information
doesn’t exist in System.

The information doesn’t
exist on the hard drive.

Check all patient
information.

Can not read Tape ID.
Register the new tape?
(y/n)

The tape ID cannot be
read.

“Yes” to register new
tape, “No” to cancel.

Retry to read Tape ID?
(y/n)

The tape ID cannot be
read.

“Yes” to retry, “No” to
cancel.

Please play VCR image
and freeze at the other
frame.

The operator has retried
to read the tape ID.

Press Play and Freeze.

Save patient information
on VCR Tape? (y/n)

Operator pressed key for
saving patient
information on the VCR
tape.

“Yes” to continue, “No” to
cancel.

Save patient information
to System? (y/n)

Operator pressed key for
saving patient
information on the hard
drive.

“Yes” to save, “No” to
cancel.

System ID = #####
Tape ID = #####

Tape was mounted or
the new tape was
registered.

System ID = #####
New Tape ID = #####

The tape was mounted.

Table 16–5. Operation Guide Message Description

Содержание 500





























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 500

Отзывы:

GE Medical Systems 500, Руководство пользователя, Страница: 598 / 636

Результаты поиска

Содержание 500

Отзывы: