manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 135 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 135

B–Mode

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

5–23

B-Mode Sub-Menu Page 4

SGL

Preset

B

Edge

Enhance

Rejectn

Image

Rotatn

Biopsy

Zone

Set Up

ECG

0DEG

40

MID

Figure 5–9.  B-Mode Sub-Menu Page 4

Biopsy Zone

Image Rotate

Description

This selection enables any electronic biopsy
guidezone(s) available for the active probe.

If the single fixed angle (SGL) was selected as
the needle guide type in Set Up/Custom
Display page 1, the fixed zone angle is
displayed.

If the needle guide type selected is multiple
angle (MBX), the Biopsy Zone rocker switch
can be used to cycle through the angle
selections MBX1, MBX2, MBX3 and OFF.

Rotates the single real-time or
zoomed B-Mode image in 90

increments.

When B-Mode is rotated 180

, the

M-Mode (if active) is also rotated
180

.

Benefits

The electronic biopsy guidezone shows the
expected needle path during insertion.

Failure to match the
guidezone displayed to
the guide may cause the
needle to track a path
outside the zone.

DANGER

Orient image display for easy
reference.

outside the zone.

It is extremely important that when using the
adjustable angle biopsy guides, the angle
displayed on the screen matches the angle set
on the guide, otherwise the needle will not
follow the displayed guidezone which could
result in repeated biopsies or patient injury.

Safety
Concern

When the biopsy
guidezone is displayed,
the message:

“Confirm BX type of Bracket”

is displayed at the bottom of the screen with the
angle selected

DANGER

angle selected.

Ensure that the (M)BX type selected for each
probe is the same as the angle selected on the
biopsy guide.

NOTE:  For specifics on availability of biopsy
guide angles, see 15–39.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов