manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 531 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 531

Probe Overview

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

15–19

Disinfecting probes (cont’d)

Ultrasound transducers can easily be damaged by improper
handling and by contact with certain chemicals.  Failure to
follow these precautions can result in serious injury and
equipment damage.

Do not immerse the probe into any liquid beyond the level
specified for that probe.  Never immerse the transducer
connector or probe adapters into any liquid.

Avoid mechanical shock or impact to the transducer and do
not apply excessive bending or pulling force to the cable.

Transducer damage can result from contact with
inappropriate coupling or cleaning agents:

Do not soak or saturate transducers with solutions
containing alcohol, bleach, ammonium chloride
compounds or hydrogen peroxide

Avoid contact with solutions or coupling gels
containing mineral oil or lanolin

Avoid temperatures above 60

°

 C.

Inspect the probe prior to use for damage or degeneration
to the housing, strain relief, lens and seal.  Do not use a
damaged or defective probe.

WARNING

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов