GE Medical Systems 500 Скачать руководство пользователя страница 512

Страница: 512 / 636

User Data Backup

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

14–108



Saving Presets (cont’d)

Set media to drive (ensure the MOD is in the drive) and
press Return.

Select the exam category name to be saved (01–08) or “All
System & Application Data” (09), enter its number and
press Return.

The system takes a few minutes to save the selected item to
the MOD. A succeed or fail message will be displayed.

Eject the MOD, label it and store it in a secure place for future
reference.

Loading Presets

To load presets back onto the system:

Type #04 User Data Backup from the Utility Menu and
press Return.

Type #02 Load and press Return.

Set the media to the drive (ensure the MOD is in the drive)
and press Return.

Select the application destination and press Return.

Eject the MOD and store it in a secure place.

The system will take a few minutes to load the presets from the
MOD to the system hard drive.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 500

Отзывы:

GE Medical Systems 500, Руководство пользователя, Страница: 512 / 636

Результаты поиска

Содержание 500

Отзывы: