manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 376 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 376

Recording Images

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

13–12

Video Cassette Recorder (VCR)

Operations

An optional video cassette recorder (VCR or VTR) is available
for the LOGIQ

 500.  The optional VCR is S-VHS compatible

for improved recording quality.

The LOGIQ

 500 supports remote control of the Sony

SVO-9500MD/MDP S-VHS Video Cassette Recorder only.
Other VCRs can record and playback video with the
LOGIQ

 500, however remote control, advanced search

functions and auto calibration will not be supported.  Control of
approved VCRs other than the Sony SVO-9500MD/MDP must
be done by the VCR front panel.

NOTE:  Measurements from VCR Playback video requires the
optional VCR measurement playback board for proper
operation.

Explanation of VCR operations assumes that the Sony
SVO-9500 is being used.  It also assumes that the “Heading
VCR Playback” option is installed.

The system can keep track of patient and tape information.  The
system can search a tape for patient images.  However, the
system CANNOT:

S

Stop or indicate when it comes to the end of the last study
on the tape.

S

Prevent recording over previous studies if record is pressed
while positioned in the middle of a study.

Without the Heading VCR Playback option:

S

The hard drive does not store patient or tape id information.

S

Auto calibration for playback measurements is not
available.

S

Image, Patient and Tape Search functions are not available.

The Record keys and foot switch can be programmed in the
Preset/Set Up menu to activate the Record/Pause function for
the VCR.

.

CAUTION

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов