manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 79 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 79

Powering On the System

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

3–21

Password Protection (cont’d)

PASSWORD:

USER   ID    :

Version X.XX

Figure 3–11.  System Startup Screen with Password Ask on

If the correct User ID/Password is entered, the system
continues with the power up sequence.

If an incorrect User ID/Password is entered, the system allows
four additional attempts.  After the fifth incorrect entry, the
message “Login incorrect” appears.  The power up sequence
will not continue.  The system must be turned off, then on, to
begin again.

NOTE:  If User ID/Passwords are registered and the Password
Ask function is off, press Return at the ID__________ prompt.
The system continues the power up sequence.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов