manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 92 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 92

Probes

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

3–34

Disconnecting the Probe

Probes can be disconnected at any time.  However, the probe
should not be selected as the active probe.

Move the probe locking handle counterclockwise.

Pull the probe and connector straight out of the probe port.

Carefully slide the probe and connector away from the
probe port and around the right side of the keyboard.

Ensure the cable is free.

Be sure that the probe head is clean before placing the
probe in its storage box.

Transporting Probes

Secure the probe in its holder for moving short distances.
When transporting a probe a long distance, store it in its
carrying case.

Storing the Probe

It is recommended that all probes be stored in the carrying case
provided.

First place the probe connector into the carrying case.

Carefully wind the cable into the carrying case.

Carefully place the probe head into the carrying case.  DO
NOT use excessive force or impact the probe head.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов