manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 67 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 67

Console Overview

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

3–9

Peripheral/Accessory Connection

Peripheral/Accessory Connector Panel

LOGIQ

 500 peripherals and accessories can be properly

connected using the rear connector panel located behind the
rear door.  Only the B/W Page Printer (UP-890) can be
connected to the front accessory panel.

Located on the rear panel are video input and output, audio
input and output, camera expose, foot switch, power and
control connections for VCR, printer, MIC and service tools.
See Figure 3–5.

Each outer (case) ground line of peripheral/accessory
connectors are Earth Grounded.

Signal ground lines are Not Isolated, except the Service Port.

All of the signal lines (including the signal ground) of the
Service Port are Isolated.

Service

Figure 3–4.  Service Port

Use only approved probes, peripherals or accessories.

CAUTION

CAUTION

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов