manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 178 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 178

Doppler

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

5–66

PW Doppler Mode Sub-Menu Page 1 (cont’d)

Wall Filter

Sample Volume (SV) Length

Description

Removes the low level, low frequency
Doppler signal caused by movement of the
vessel walls.  (Also found in the CWD soft
menu.)

Changes the size of the sample volume
gate length.

NOTE:  Adjustments to the sample volume
gate size are made from the center point
of the sample volume position.  A larger
gate will increase the spectral broadening
affect to the spectrum.

Benefits

Eliminates unnecessary information.
Filters out low level noise above and below
the baseline so it cannot be seen or heard
on the spectrum.

A smaller gate produces accurate
sampling results because it is more
sensitive.  The gate can be enlarged if
there are problems hearing the Doppler
audio or for sampling large chambers.

Values

The value can be displayed as velocity or
frequency (Setup/Custom Display
page 14).  Wall Filter cutoff values are
selected as cm/s in Setup/Custom Display
page 4.

1.0, 2.0, 3.0, 5.0, 7.0, 10, 15 or 20 cm/sec.
The values could go as high as 50 cm/s
depending on the probe and the velocity
scale.

Pre-processing function.

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 and 
16 mm.

Pre-processing function.

Affects on 
Other Controls

Wall filter changes with velocity scale.

Bioeffects

Acoustic

O

Adjusting this control may cause minor
changes in acoustic output.  Observe the
output display for possible effects.

Output

Hazard

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов