manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 592 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 592

Troubleshooting

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

16–26

Display Messages

The LOGIQ

 500 provides a variety of messages concerning

the status of the system’s operation.

System Error Messages are displayed when a hardware
problem is detected.

Operation Error Messages are displayed when the user
selects a control that is not appropriate to the current scan
mode or function.

Operation Guide Messages are displayed to inform the
operator of a completed task or required action.

Warning Messages are displayed for patient safety or
system failure reasons.

System Preparation Message is displayed when the system
powers up.

These messages are displayed in the single line message area
at the bottom of the display.  The message display time varies
depending on the type of message.  Some messages may be
accompanied by an audio tone.

For Operation Error Messages, the user can choose to turn
on/off the audio tone that accompanies the display in the Set
Up/System Parameters page 1.

The User can turn on/off the recording of the error message line
in the Set Up/System Parameters page 5 (Maskline Record).

The following tables outline the error messages, their possible
cause and cure.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов