GE Medical Systems 500 Скачать руководство пользователя страница 418

Страница: 418 / 636

Custom Display

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

14–14



Page 1 of 20 (Imaging Parameter 1 – Probe Dependent 1)

Enter Depth

EC, UP, P, R

Choose the desired default display depth for the probe indicated.

4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22 or 24 cm.

Focus Depth [mm]

EC, UP, P, R

Choose the desired default focus depth for the probe indicated.

Depth from 1 to 240 mm in 1 mm increments.

Image Rotation EC, UP, P, R

Choose the desired default image orientation.

0 (N)

Normal top to bottom orientation.

90 (W)

left to right orientation.

180 (S)

Inverted bottom to top orientation.

270 (E)

270

right to left orientation.

Image Reverse EC, UP, P, R

Choose the initial default setting of image reverse (left-right orientation).

On or Off.

Zoom Auto Start EC, UP, P

Choose to automatically place the image into the zoom mode after a probe selection
change.

Off

No auto zoom at probe change.

Auto zoom mode at probe change.

Zoom Reference EC, UP, P

Choose the zoom reference image default setting.

On or Off.

Zoom Factor EC, UP, P, R

Choose the default zoom factor for the read (freeze) zoom.

1.0, 1.2, 1.5, 2.0, 2.5, 3.0 or 4.0.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 500

Отзывы:

GE Medical Systems 500, Руководство пользователя, Страница: 418 / 636

Результаты поиска

Содержание 500

Отзывы: