manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 88 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 88

Probes

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

3–30

Probes

Introduction

Only use approved probes.

All imaging probes can be plugged into any of the three probe
ports.

Refer to the 

Probes

 chapter.

Selecting a probe

S

Always start out with a probe that provides optimum focal
depths and penetration for the patient size and application.

S

Begin the scan session using the default Acoustic Output
setting for the probe and application.

NOTE:  Selecting a new probe unfreezes the image.

Connecting the Probe

Probes can be connected at any time, regardless of whether
the console is powered on or off.  To ensure that the ports are
not active, place the system in the image freeze condition.

To connect a probe:

1.

Place the probe’s carrying case on a stable surface and
open the case.

2.

Carefully remove the probe and unwrap the probe cord.

3.

DO NOT allow the probe head to hang free.  Impact to
the probe head could result in irreparable damage.

4.

Turn the connector locking handle counterclockwise.

For more

information

Hints

.

CAUTION

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов