manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 267 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 267

OB Measurements and Formulas

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

 9–5

OB Measurements and Formulas

Introduction

Measurements and calculations derived from ultrasound
images are intended to supplement other clinical procedures
available to the attending physician.  The accuracy of
measurements is not only determined by the system accuracy,
but also by use of proper medical protocols by the user.  When
appropriate, be sure to note any protocols associated with a
particular measurement or calculation.  Formulas and
databases used within the system software that are associated
with specific investigators are so noted.  Be sure to refer to the
original article describing the investigator’s recommended
clinical procedures.

If obstetrics was selected as the exam category on the Patient
Entry Menu, the OB Menu automatically appears in the
Soft-Menu when the Measurement key is pressed.

OB Format Selection

Four types of OB measurements and report pages can be
selected from the Set Up/System Parameter Menu page 2.

The user may choose to measure and report items based on
Tokyo University, Osaka University, USA or European methods.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов