manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 168 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 168

Doppler

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

5–56

Reading the Doppler Display (cont’d)

The following additional parameters are displayed when in
Doppler Mode.

θ

S p e c t r u m
Ref. Value

Graphic Display

Description, Format, Values

Doppler Frequency (D)

The value is displayed in MHz (MegaHertz).

Pulse Repetition
Frequency (R)

Displays the frequency in KHz (KiloHertz).

Wall Filter (WV)
                  (WF)

The velocity value is displayed in m/sec (meters per second) or the frequency
value in Hz.

WV###

Dual Mode:

###WV###

Sample Volume
(Length) (SV)

Displayed in mm.

SV##

Dual Mode:

##SV##

q (

Angle)

Indicates the Doppler Angle in 

Q

 (degrees) between the Doppler Mode cursor and

angle correction indicator.

q

##

Dual Mode:

##

q

##

D.G

Doppler signal gain is displayed as a two digit number.

HPRF

Displayed to indicate that the system is in the high pulse repetition frequency
mode.

SPEC INV

Displayed to indicate that the spectrum display is inverted from the prescribed
norm.

D. Velocity

The Doppler velocity or frequency maximum value is displayed in meters per
second when 

“Display Spectrm Ref. Value” preset, found on Set Up/Custom

Display page 16, is set to “Off”.  The forward velocity (frequency) is displayed
above the spectrum while the reverse velocity (frequency) is displayed below.
When the spectrum is inverted, the velocity scale readings also invert.

Time Scale

Three speeds:

Slow (4 second sweep).  Major marker = 1 second; minor marker = 0.5 second.

Medium (2 second sweep).  Major marker = 1 second; minor marker = 0.5 second.

Fast (1 second sweep).  Major marker = 1 second; minor marker = 0.5 second.

Spectrum Ref. Value

Doppler velocity or frequency value is displayed as a reference scale when
“Display Spectrm Ref. Value” preset, found on Set Up/Custom Display page 16, is
set to “On”.  The scale size varies depending on velocity or frequency.

Table 5–9.  Doppler Mode Display Format

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов