manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 74 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 74

System Positioning/Transporting

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

3–16

Wheels

Examine the wheels frequently for any obvious defects that
could cause them to break or bind.

Front wheels

The front wheels swivel, pivot, and lock.

Back wheels

The back wheels swivel and pivot but do not lock.

NOTE:  For the USA version console, the back wheels do not
pivot.

Setting the lock

To engage the wheel lock:

Press down on the lock pedal (located at the front of
the wheels).  The pedal remains depressed.

To release the lock:

Press down on the pedal again.  The pedal returns to
its normal position.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов